Ball Bearings
Miniature Bearings
Thin Section Bearings
Angular Contact Ball Bearings
Flanged Ball Bearings
Deep Groove Ball Bearings
Thrust Ball Bearings
Self Aligning Ball Bearings
Mast Guide Bearings
52100 Chrome Steel Balls
Super Precision Bearings
Roller Bearings
Ceramic Bearings
Stainless Steel Bearings
Chain
Thrust Ball Bearings
Thrust ball bearings are separable bearings. The single-acting thrust ball bearing consists of a shaft washer, a housing washer, and a ball set with cage. The double-acting type consists of a shaft washer (centre washer), two housing washers, and two ball sets with cages. Thrust ball bearings can be a valuable solution for applications requiring pure axial loads or combined axial and radial loads, where radial loads are relatively small. The separable design allows for easier installation and removal, as well as maintenance and inspection, without the need to dismantle adjacent machine components. This makes thrust ball bearings particularly suitable for applications where frequent adjustments or replacements are necessary.
Metric Single Direction Thrust Ball Bearing
They can withstand axial thrust loads in one direction.Range in bore diameters from 10mm to 1400mm.
Double Direction Thrust Ball Bearings
They can withstand axial thrust loads in both directions.Range in bore diameters from 10mm to 150mm.
Single direction thrust ball bearing with sphered housing washer
The bearings are press-fit on the shaft with precision machined raceways and aligned washers. They are used in a variety of medium to heavy load, high speed applications.
Thrust Ball Bearing With Outside Band
Thrust ball bearings with outside band are suitable for use in exposed locations that require protection from dust, dirt, water or other foreign matter. The balls are held between two hardened steel races that are tied together by a mild steel or brass sleeve on the outer diameter.