63003 Deep Groove Ball Bearing with Dimensions, Abutment Dimensions and Calculation Data in ITS
63003 bearings are major products in ITS. This 63003 bearing is Deep Groove Ball Bearing. ITS deep groove ball bearings are one of the most common style of ball bearings which support axial forces in both directions as well as radial forces. The bearing has a single row of balls retained in a cage and is sealed for life with an NBR seal on both sides of the bearing, the bearing is pre-greased which means you do not need to lubricate the bearing.
DIMENSIONS
d | 17 mm | Bore diameter |
D | 35 mm | Outside diameter |
B | 14 mm | Width |
d1 | ≈23 mm | Shoulder diameter |
D2 | ≈31.2 mm | Recess diameter |
r1,2 | min.0.3 mm | Chamfer dimension |
ABUTMENT DIMENSIONS
da | min.19 mm | Diameter of shaft abutment |
da | max.22.9 mm | Diameter of shaft abutment |
Da | max.33 mm | Diameter of housing abutment |
ra | max.0.3 mm | Radius of shaft or housing fillet |
CALCULATION DATA
Basic dynamic load rating | C | 6.05 kN |
Basic static load rating | C0 | 3.25 kN |
Fatigue load limit | Pu | 0.137 kN |
Limiting speed | 13 000 r/min | |
Minimum load factor | kr | 0.025 |
Calculation factor | f0 | 14 |
Deep Groove Ball Bearings are the most common bearing type found in a wide variety of applications. Versatile and robust they are available in a wide range of sizes and options including seals, shields and special clearance for high speed applications.
Welcome to contact ITS for your 63003 bearing !
https://www.its-bearing.com/products/63003-bearing/tpid:30211.html##
